Ultra MPSH08H37A – Super High Rate Small Capacity Battery cell| 3.7V Ternary | 800 mAh

Ultra MPSH08H37A – Super High Rate Small Capacity Battery cell| 3.7V Ternary | 800 mAh

The Ultra 3.7V Ternary 800mAh is the entry cell of the Ultra series — 19g, 5.0mm, in the narrow 20×96mm pencil-profile footprint. It delivers 88A peak (110C) and 48A continuous (60C) with microsecond pulse response, storing 2.96Wh. Built for FPV drones, RC cars, RC airplanes, RC boats, and gun models where instantaneous power and minimum weight define performance. Ceramic separator and PVDF construction ensure stability under extreme rates. Charges at 2C in ~30 minutes.

Description

The lightest cell in the entire Midlands Power catalog — and the entry point to the Ultra series. The 3.7V Ternary 800mAh delivers 88A peak at 110C and 48A continuous from a 19g, 5.0mm soft pack in the 20×96mm footprint — lighter than every Volt, Prime, Max, and Ultra cell in the lineup, and the thinnest cell in the 20×96mm family. Built for FPV racing drones, competitive RC cars, RC aircraft, RC boats, and gun models where the narrow 20×96mm pencil geometry is the fixed constraint and absolute minimum weight is the build requirement.

 

Key Specifications at a Glance

Specification Value
Nominal Voltage 3.7V
Capacity 800mAh (0.8Ah)
Stored Energy 2.96Wh
Continuous Discharge 60C / 48A
Peak Discharge 110C / 88A
Charge Rate 2C / 1.6A (~30 min)
Dimensions 20 × 96mm
Thickness 5.0mm
Weight 19g (±5%)
Construction Ceramic separator / PVDF electrode
Application Racing-grade FPV / RC car / RC aircraft / RC boat

 

Why Choose the Midlands Power 800mAh Ultra Ternary Battery?

19g — The Lightest Cell in the Entire Midlands Power Catalog

At 19g, the 800mAh is lighter than every cell across all four Midlands Power series — Volt, Prime, Max, and Ultra. In competitive racing and FPV applications, 19g is not a specification detail — it is a design target. Every gram removed from the power system contributes to faster acceleration, tighter handling, and higher agility. There is no lighter option anywhere in the Midlands Power lineup. For micro racing builds operating at the absolute minimum weight boundary, this cell defines the floor.

 

110C Peak — 88A Burst From 19 Grams

Advanced electrode material formulation delivers 88A of instantaneous peak burst current at 110C from a cell weighing just 19g and measuring 5.0mm thick. The entire 800mAh capacity can theoretically discharge in under 33 seconds at sustained peak load — delivering maximum power density precisely when the platform demands it. For racing-grade platforms where the discharge happens in a burst rather than over minutes, the 110C architecture is the definitive specification the Ultra series is built around.

 

5.0mm — The Thinnest Cell in the 20×96mm Format

At 5.0mm, the 800mAh is the thinnest cell in the 20×96mm family — 0.5mm thinner than the 1,000mAh (5.5mm). For builds where the 20×96mm planar dimensions fit but bay depth is strictly constrained below 5.5mm, the 800mAh is the only option in this format. There is no alternative at this depth in the 20×96mm family.

 

Smooth End Voltage — Stable 3.7V Platform Throughout Discharge

The 3.7V Ternary chemistry delivers a characteristically smooth end voltage — the voltage platform remains stable and predictable throughout the discharge curve rather than collapsing sharply at high C-rates. For ESC and motor controller systems calibrated to a specific input voltage range, this smoother voltage behaviour translates into more consistent motor response and more predictable handling characteristics throughout the racing run, from full charge to cutoff.

 

The Entry Point to the Ultra Series and the 20×96mm Format

The 800mAh opens both the Ultra series and the 20×96mm format — the starting point for builders entering the racing-grade rate architecture. At 5.0mm and 19g, it establishes the minimum weight and depth baseline from which every other 20×96mm cell steps up. For builds where the 1,000mAh’s 22g and 5.5mm are within budget, the 1,000mAh delivers +25% across every specification for just 3g more. For builds where 19g is the absolute ceiling, the 800mAh is the only answer.

 

Ceramic Separator and PVDF Electrode — Industry-First Racing-Grade Construction

Industry-first ceramic separator and PVDF electrode construction deliver thermal resistance and structural integrity at the extreme output levels of competitive racing. The ceramic separator provides higher thermal resistance than conventional polyolefin separators, reducing the risk of thermal runaway under sustained high discharge rates and mechanical stress. The PVDF binder maintains electrode structural integrity through the high mechanical loads of rapid charge-discharge cycling, contributing to the long cycle life that makes this cell a cost-effective and durable choice for competitive platforms demanding reliability across hundreds or thousands of cycles.

 

Full 20×96mm Format Comparison

800mAh 1,000mAh
Thickness 5.0mm 5.5mm
Weight 19g 22g
Energy 2.96Wh 3.70Wh
Peak 110C / 88A 110C / 110A
Continuous 60C / 48A 60C / 60A
Charge Rate 2C / 1.6A 2C / 2.0A
Best For Absolute minimum weight in 20×96mm Maximum energy and current in 20×96mm

 

Stepping Up From the 800mAh — The Only Step Available

The only capacity step within the 20×96mm format moves from the 800mAh to the 1,000mAh — adding 0.74Wh of stored energy (+25%), raising peak burst from 88A to 110A (+22A), and raising continuous from 48A to 60A (+12A), for just 3g of additional weight and 0.5mm of additional thickness. No frame modification is required. For builds where 22g and 5.5mm are within budget and more current is needed, the 1,000mAh is the direct upgrade. For builds where 19g is the fixed limit, the 800mAh is the definitive choice.

 

Charging: 2C / 1.6A — Full Charge in ~30 Minutes

The 2C continuous charge rate delivers 1.6A input, fully charging the cell in approximately 30 minutes. Running multiple cells in rotation at 2C sustains back-to-back racing sessions at the minimum weight point of the Ultra lineup without interruption.

 

Ideal Applications

FPV racing drones — 110C peak and 19g minimum weight, the maximum power-to-weight ratio for the tightest racing frames in the Ultra lineup.

Competitive RC cars — 88A peak burst in the 20×96mm format, direct fit for narrow RC car battery bays requiring maximum instantaneous current at minimum weight.

RC aircraft — 5.0mm thin profile and 19g suit slim wing and fuselage battery compartments in racing-grade aircraft.

RC boats — 60C / 48A continuous sustains full-throttle motor loads in competitive boat racing without voltage sag.

Gun models — 20×96mm pencil format and 19g fit the tight battery cavities of high-rate gun model platforms.

Ultra-compact FPV builds — the thinnest and lightest option in the 20×96mm format, the starting point for builds where every tenth of a gram counts.

 

Product Summary

The Midlands Power 3.7V Ternary 800mAh opens the Ultra series as the lightest cell in the entire Midlands Power catalog — 19g, 5.0mm, 2.96Wh — at 110C peak and 88A burst from the narrowest, most compact profile the Ultra lineup offers. For micro racing builds in the 20×96mm geometry where minimum weight and depth below 5.5mm are the fixed constraints, this is the entry point to the racing-grade rate architecture and the absolute minimum weight the catalog provides.

Series: Ultra | Chemistry: 3.7V Ternary | Construction: Ceramic separator / PVDF electrode | Form Factor: Soft Pack / Pouch Cell

Additional information

Battery Type

LiPo

Capacity

0 – 1,000 mAh

Voltage

3.7V

Reviews

There are no reviews yet.

Be the first to review “Ultra MPSH08H37A – Super High Rate Small Capacity Battery cell| 3.7V Ternary | 800 mAh”

Your email address will not be published. Required fields are marked *